Cobra 1050 Sailing Yacht
New engine and electronics
- Boat REF# · 314073
- Length · 10.46m
- Year · 1981
- Construction · GRP
- Underwater profile · Fin
- Sleeping berths · 9
- Engine · 1 x diesel 35hp, Beta Marine Beta 35 (2018)
- Lying · Fowey, UK
Extra Details
Designer | David Feltham |
---|---|
Builder | Cobra Yachts (Mouldings) |
Lying | Fowey, UK |
Fuel capacity | 22.0 USG Total - 1 Tanks |
Water capacity | 44.0 USG Total - 2 Tanks |
Last survey | 23/05/2022 |
Mechanical
Engine | 1 x diesel 35hp |
---|---|
Engine make and model | Beta Marine Beta 35 (2018) |
Engine Hours | Not Recorded |
Engine Cooled | Indirect |
Steering | wheel |
Drive | shaft |
Prop(s) | 3 Blade Fixed (Rope Cutters) |
Fuel consumption (approx) | 0.3 USG /hour At Cruising Speed |
Cruising speed (approx) | 5 knots |
Max speed (approx) | 7 knots |
Generator output | 1KVA |
Engine installation includes the power train, i.e. shaft, bearings and propeller. (2018)
Dimensions
Length | 10.46m |
---|---|
LWL | 9.14m |
Beam | 3.66m |
Draft Max | 1.80m |
Displacement | 14,002.4lbs |
Headroom | 1.82m |
Storage | On mooring |
Rig
Sloop rigged Isomat Aluminium spars (1981) with Stainless Steel standing rigging (2017)
Sails
Reefing mainsail | Vectron - Inmast (2018) Lazy Jacks, 3 Reefs |
---|---|
Headsail | Crusader - Furling (2017) |
Electrical Systems
12 volt battery, 240 shore power voltage, 3 batteries charged by: engine, solar panels, shore power, generator Portable generator included
Construction
Construction | GRP |
---|---|
Underwater profile | Fin |
Finish | Paint finish |
Water tanks are bladder type and new.
Accommodation
Total # of berths | 9 |
---|---|
No. of double berths | 3 |
No. of single berths | 3 |
Cabin(s) | 1 |
Sink | 1 |
Shower | 1 |
Heads | 1 heads (Manual) |
2 burner propane Stove
Accommodation
Stove | |
---|---|
Broiler | |
Oven | |
Sink | |
Refrigerator | |
Cabin heating | |
Pressurised water system | |
Hot water system | |
Non-Smokers |
2 burner propane Stove
Deck Gear
Sprayhood | |
---|---|
Rode | |
Fenders | |
Boathook | |
Swim Ladder | |
Instrument Covers |
2 halyard winches
4 sheet winches
Electric Lewmar windlass
1 anchors
(Bruce)
62.00m of chain
SeaGo dinghy ()
(Inflatable)
4hp outboard, Bisson Electric + Battery, Short shaft (2022)
Nav Equipment
Compass | |
---|---|
Speed | |
Log | |
Wind | |
Radar | |
VHF DSC radio | |
GPS | |
Autopilot | |
Navtex | |
Clock | |
Barometer | |
Navigation lights | |
AIS Receiver | |
Depth sounder |
Radar array needs minor attention.
Suite of new NASA navigation instruments included
NewVesper Watch Mate XB6000 AIS (2022)
Safety Equipment
Fume detector |
---|
2 bilge pumps (1 manual / 1 electric)
Broker's Comments
This Cobra 1050 was moulded by Cobra Yachts UK and fitted out in a boatyard near Golant, Fowey where, believe it or not, she has remained throughout her entire life.
The current owner has continued to upgrade this Cobra and includes standing rigging, sails, new engine and comes with a brand new suit of Nasa navigation instruments and AIS - that have yet to be fitted. The engine installation includes new shaft bearings and propeller, so the whole power train is very new.
Outboard of the saloon, port & starboard, you will notice there is some work in progress to remove two outboard bunks and fit additional storage cabinets. This has been put on hold now the current owner has decided to sell, allowing the new owner to decide what needs to be done.
These boat details are subject to contract.
Note: Offers on the asking price may be considered.
Owners FAQ's
How long have you owned the boat for?
Less than a year
Why are you selling her?
Change of life plan
Where have you sailed her?
English Channel